News:

Welcome to FlyHelio.com. The online forum and website of the Helio Aircraft Association, Inc.

Main Menu

Skis for Helio

Started by akflyr, October 16, 2013, 12:03:43 AM

Previous topic - Next topic

Evgen

Quote from: Louis on October 12, 2026, 09:38:54 AMThe

I will ask neil about the tires. What size is your wheel that accommodate the 29 inches tire ?


Louis, my main tires are Air Hawk 29×11.00-10, 10-ply, so the wheel rim diameter is 10 inches (254 mm).

Thank you for explaining how these skis work! This is very important information for me.

And thank you for asking Neil about the tires!
The ski manufacturer says that snow brakes aren't particularly necessary because they only work effectively on hard-packed or compacted snow. In deep, soft powder snow, they're practically useless.
Sincerely, Evgeny

Evgen

#31
These skis in the photos were installed on a Dornier Do-27 with 10×8 wheels.
The ski manufacturer says that the ideal tire size for his skis is 8.50×6. The 10×8 tires on the Dornier Do-27 were already the maximum size they could accommodate, with only 2–3 mm of clearance on each side.
Sincerely, Evgeny

Louis

The skis you are showing are great !!  Electric actuator !!  A lot easier to install than hydraulics. 

Evgen

Quote from: Louis on October 14, 2026, 06:06:09 AMThe skis you are showing are great !!  Electric actuator !!  A lot easier to install than hydraulics. 

The brakes on these skis are electrically operated too, but I think they're pretty much useless and just add extra weight!

The builder told me that once, while fitting these skis, a customer accidentally activated the wheel retraction while the aircraft was standing on the ground. The electric actuator pushed the ski plate underneath the tire! It gave them a bit of a scare, but fortunately nothing was damaged!
Sincerely, Evgeny

Louis

A way to help turn is helpfull when you are on skis on a runway of snow.  Because it takes a very large radius to turn.  The way i would do it with electric piston would be to put two switches .  That way you could put out the wheels on the side you want to turn.  But will the plate will go back under the tire once the U turn completed ?  Neil had a valve like that on his Helio.  He was able to put one of the wheel down for U Turns.  Once i was on a narrow airport strip.  On snow.  With the 800.  And i had to U turn on the runway.  It would not turn easy.  There was that guy with it's 12 years old son.  They offered to help me.  So i put a rope on the wing attachment on the side i want to turn and ask them to try to hold the rope as they can while i put full power to turn.  It worked !!  But then i decide to taxi full power to the other end, until i see that poort boy still holding the rope and being drag into the snow at 20 km hr   I stopped.  He had snow even in it's underwear at that point

Evgen

Quote from: Louis on October 15, 2026, 05:54:14 PMA way to help turn is helpfull when you are on skis on a runway of snow.  Because it takes a very large radius to turn.  The way i would do it with electric piston would be to put two switches .  That way you could put out the wheels on the side you want to turn.  But will the plate will go back under the tire once the U turn completed ?  Neil had a valve like that on his Helio.  He was able to put one of the wheel down for U Turns.  Once i was on a narrow airport strip.  On snow.  With the 800.  And i had to U turn on the runway.  It would not turn easy.  There was that guy with it's 12 years old son.  They offered to help me.  So i put a rope on the wing attachment on the side i want to turn and ask them to try to hold the rope as they can while i put full power to turn.  It worked !!  But then i decide to taxi full power to the other end, until i see that poort boy still holding the rope and being drag into the snow at 20 km hr   I stopped.  He had snow even in it's underwear at that point

Thank you, Louis! 😁

As always, your experience is priceless, and your stories are just as good!

I can just imagine that poor boy being dragged through the snow behind your H800! 😂 I bet he remembers that day for the rest of his life! And I'm pretty sure that was his first and last job as an aircraft ground crew member! 😂

But seriously, that's a very useful point about making U-turns on skis. I hadn't thought about that before, and now I understand why independent control of the skis could be so useful.

Every time you share your experience, I learn something new about the H800. Thank you, my friend! 🤝
Sincerely, Evgeny

Louis

One trick to Uturn in a tight spot with skis, as explained in the no longer available book " Pilote de Brousse¨ is to wrap some ropes around the skis on the side you want to turn.  That way it makes friction in the snow and you can YouTurn

There is a lot of trick in that book for flying in the bush.  That guy was incredible.  Very calm pilot.   Very analytic


Louis

#37
A thousand years ago, a friend of mine asked me to come pick up a gift he had for my birthday.  He was on a very small lake and based there with his J3.  It was winter on skis.  So I go there with the 800.  I can see his plane.  But the lake was so small !!  There was a small island.  So I start an approach.  On short final i see a set of electric wires between the island and the shore !!  I put back power, and I came back by the other side of the island.  But it was so short !!  So finally, just before touching, i do a go around full power, and I decide to go back home.

Six months later, I received a letter from Transport Canada regarding low flying.  Low Flying ?!?  What date?  The date of my birthday.  I check my logbook, and I see that I did just a flight from home to home.  And they gave me the name of a lake where people had seen me doing a low flying.  Finally, my memories come back, and I remember that episode of my attempt to land on the small lake.  I decided not to pay the fine and go to court to defend myself

When it is a Transport Canada court, the judge is not a real judge but somenone that know about flying and flying regulations.  To my surprise, the judge is mister Pierre Rivest, the famous pilot and author of the book.  I was honored to be judged by him.

So when the court started, the prosecutor of Transport explained that I did some low passes on the lake, and that he had witnesses to prove it.  The witness explained that i did two low passes, and they were convinced that I did that to scare them.

When it was my turn to speak, I told my story that I was attempting to land and that i decided it was not safe.  And then I produced part of the text in the book of mister Rivest that says you should always make an approach or two when you are unsure.  And that is called a precautionary approach.  I had photocopied
the page of the book of mister Rivest to show to the court it was a recommended practice that I had followed.  The text was explaining that it is always good practice to make  precautionary approach and to do a go-around if you are not sure it is safe to land.

The prosecutor of Transport said he was opposing that text because it could have been written by anybody, maybe a bad pilot, maybe not even a pilot, maybe it was garbage

The judge, mister Rivest look at me and asked me where I had photocopied that page.

- From your book, your honour ....

The prosecutor became green.  He had just lost his case

;-) 


Evgen

Quote from: Louis on October 16, 2026, 01:31:19 PMThere is a lot of trick in that book for flying in the bush.  That guy was incredible.  Very calm pilot.   Very analytic



You really got me interested in that book, Pilote de Brousse. Do you remember who wrote it? I would love to find a copy, even if it's in French. There must be a lot of valuable experience in it!

And I think you could write a book like that yourself, Louis! With all your experience flying Helios in the Canadian wilderness, I'm sure it would be just as interesting!
Sincerely, Evgeny

Evgen

Louis, this is absolutely priceless!

I can only imagine the prosecutor's face when you said, "From your book, Your Honour!" I think at that moment he wished he could do a go-around himself!

But jokes aside, I really admire your decision not to land when you realized it wasn't safe. That's the kind of judgment that makes a truly experienced bush pilot.

And now I understand why you respect Pierre Rivest so much!

Louis, I was already convinced that you should write a book about your flying adventures. But after this story, I'm absolutely certain! I would be one of your first readers!
Sincerely, Evgeny

Louis

A lot of technical information here about angles and installation .  These skis are made here and sold eveywhere even in Siberia as you already know.

But they don't go up to the 4000 pounds you need

https://www.datumair.com/pdfs/manual-1500.pdf

Evgen

Quote from: Louis on October 18, 2026, 06:00:45 AMA lot of technical information here about angles and installation .  These skis are made here and sold eveywhere even in Siberia as you already know.

But they don't go up to the 4000 pounds you need

https://www.datumair.com/pdfs/manual-1500.pdf

Thank you, Louis! I've looked through the manual, and there's a lot of useful technical information in it. I'll definitely save it for future reference!

I also noticed the interesting design of these skis, especially the fairing on top. It seems to me that it might help reduce the aerodynamic drag of the wheel. I haven't seen anything quite like it on other skis.

Even though these skis aren't suitable for the weight of my H800, there are some very interesting ideas here that might be useful when designing skis for my airplane.

Thanks again, my friend!
Sincerely, Evgeny

Louis

Quote from: Evgen on October 18, 2026, 10:08:17 AMit might help reduce the aerodynamic drag

Dont loose energy with aerodynamic drag in the world of Helio

;-)

Louis

One of the thing that i find usefull with skis is to be able to switch from Wheel to skis to wheels on the snow.  Because thos d&??%% skis always stick, glue, to the surface of the snow after a night-long parking.  Being able to switch configurations helps us kick them loose from the surface sticking.

In the book Pilote de Brousse, mister Rivest talk about spraying some diesel on the snow before the night at the place you will park.  Never tried it. 

Here is a mistake we all make on the first flight:  You go to your cabin on the frozen lake, you are excited and nervous, you succeed to land, you are so happy, then you taxi toward your cabin, quite close to the forest edge because you don't want to walk too much in deep snow, you killed the engine, go out very proud not to have broken anything, and then you realised that the nose of the plane is toward the forest, 100 meters or so, and that the next morning you will have only that 100 meters to do your Uturn.

Always stop far away, and the nose pointing toward a clear path.

Yuo can't use a snowmobile to turn your plane because your skis won't turn being in the snow.  If you pull hard to turn the plane, you will crack your landing gear.

The only way if you are stuck like that, is to shovel down to the ice, put your configuration to wheels, turn the plane on place, put back on skis

It is a lot of thinking to operate a 3000 pounds or plus airplane on snow.  A lot easier with a J3 or small planes. 

Louis