FlyHelio

General Category => General Helio Discussion => Topic started by: Barry Dechert on November 03, 2018, 08:14:38 AM

Title: Helio H391B master & starter relays
Post by: Barry Dechert on November 03, 2018, 08:14:38 AM
Has anyone had to substitute the original starter relay and or the master relays from the original part #’s? Looking for options I know of many relays I have researched and the original part # for the master relay some sites say not FAA approved hmmm. If I am to substitute approved relays I am assuming discussing this with my F.S.D.O.
The starter relay I cannot find the part # available.
Solenoid part #2295-7, alternate # 70-111226. The starter relay I don’t have a part # for the original. Some may consider this minor deviation.
The aircraft is H391B, s/n 091. N4431U.
Title: Re: Helio H391B master & starter relays
Post by: Kevin Dunn on November 05, 2018, 09:35:28 AM
Barry,

Sky-Tec has a line of FAA PMA'd solenoids (available through Spruce) that are eligible for installation on a large number of certified aircraft. If your FSDO wants a field approval because Helios are not listed in the eligibility paperwork, it will be far easier if you start with a PMA'd part.

Kevin
Title: Re: Helio H391B master & starter relays
Post by: Barry Dechert on November 06, 2018, 10:02:59 AM
Thanks I agree, I wasn’t hoping for a magic part number but curious if I was seeing the best options out there. Never did find any part number for the original start solenoid. 12 volt on this H391B.